Homepage | Set Home | Add to Favorites
Member

Shanghai Maiyang Machinery Equipment Co., Ltd.


Products
  • No Category
Search
 

Friends links

Piston Air Motor
Click image to view full size image
Product: Views:165Piston Air Motor 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2019-11-17 22:36
  Inquiry
Details

Product introduction:

Piston pneumatic motor is often used in industrial transmission occasions that are suitable for frequent start-up conversion, high temperature and humidity, heavy load, such as papermaking, metallurgy, chemical industry, light industry and other occasions.

Air pressure:  When selecting pneumatic motor, please note that the technical specification list only represents the output parameters of the motor when the standard operating pressure is 0.62MPa. The output capacity of the pneumatic motor is related to the air pressure provided by the workplace. By adjusting the pressure, the air supply and the exhaust gas, the same motor can realize different output speed, torque and power in a certain range, and the performance of the motor can not be stable when the pressure of the motor air source is lower than 0.25MPa. In general, the specifications of the pneumatic motor are selected based on 70% of the technical parameters, so that additional power can be provided for starting and possibly overloading,

Maximum power: In general, when the speed of pneumatic motor is about 50% of the no-load speed, the maximum power is outputted.

Working speed: When choosing a pneumatic motor, you should first take into account the working speed rather than the idling speed

Note: The pneumatic motor should not idle for a long time. The performance curve in this catalog is only the maximum speed that can be achieved theoretically by motor operation, which is generally not recommended to run in this situation.

Working torque: The technical parameter, which is as important as the operating speed of the pneumatic motor, is the operating torque. The two factors of rotating speed and torque determine the required motor power. When a pneumatic motor is selected, the difference between the blocking torque and the working torque must be observed.

Speed and torque: The starting torque is about 75% of the blocking torque.

The operating torque or the rated speed torque at any speed can be approximated to the motor performance curve or calculated by the use of the following formula:  torque (Nm) = power (KW) * 9550/ speed (rpm)

Air system, air supply and flow:  Once a pneumatic motor is selected, it is important to ensure that the required air pressure is provided to the motor when the motor is in operation. Because of the possible pipeline loss in the air system, the pressure reading on the compressor does not mean that the pneumatic motor in operation will reach the same pressure. Exhausted throttling may also have effect on the operation of pneumatic motors, which is often the cause of failure

Air inlet control: When installing reversible pneumatic motors, fast discharge valves should be used to prevent unsmooth secondary exhaust

To take the place of  motor with a pneumatic motor:  In addition to the DC series winding motor, the performance curve of the motor is completely different from that of the pneumatic motor, and their torque and speed curves can not match.

Product parameters:


Piston airmotor



Maximum Output

Mass

(Product number)

Model

Power

Torque

 Speed

Air Consumption

Basic type


 HP

KW

Ib.in

N.M

RPM/min

CFM

L/Min

KG


TMH-0.1

0.1

0.075

5.66

0.64

1100

7

200

1.8

MH1010C

1.9

MH1010F

2.8

MH1010L

2.3

MH1010I

TMH-0.25

0.25

0.185

17.25

1.95

1000

9.5

260

3.3

MH2514C

3.5

MH2514F

4.3

MH2514L

4

MH2514I

TMH-0.33

0.33

0.24

24.33

2.75

900

11

315

3.3

MH3314C

3.5

MH3314F

4.3

MH3314L

4

MH3314I

TMH-0.5

0.5

0.375

42.47

4.8

720

16.5

460

5.9

MH5016C

6.1

MH5016F

8.2

MH5016L

6.1

MH5016J

TMH-0.66

0.66

0.49

56.63

6.4

800

20.5

580

6.1

MH6619C

6.5

MH6619F

8.4

MH6619L

6.5

MH6619I

TMH-1.0

1.0

0.75

178

19

500

53

1500

24

MH0024C


MH0024F


MH0024L


MH0024I

TMH-1.5

1.5

1.125

246

28

500

53

1500

24

MH5024C


MH5024F


MH5024L


MH5024I


Piston air motor has the following advantages

1 Infinitely variable speed and variable torque through pressure or flow regulation, without expensive controller

2 It can start, stop and turn quickly.

3 It will not overheat or burn out even under overload and stall

4 Safe operation under dangerous conditions, no sparks or hydraulic oil leaks, it is an absolutely explosion-proof equipment

5 With cold running characteristics to minimize the effects of high temperature, humidity or dusty environment

6 With simple design, sturdy structure, and low maintenance rate

7 With compact size, light weight, large power output, and high overload capacity



http://www.chinamaiyang.com/

Inquiry